Product Overview
The Versa Receiver Arm and the Versa Snowmobile plate are the central part of the Versa Rack system. We provide 3 different options. Accessories can be used on a ATV, UTV or Snowmobile.
ATV or UTV
The Versa Receiver Arm connects to any 2” receiver and the curved upright provides the proper height for the drop-in Versa Rack accessories. The upright piece can be adjusted front to back with two set screw bolts. The entire assembly is held in place with a wobble stop bolt to prevent any movement. Made of 11ga and 12ga steel for strength. Long version for most UTV applications and short version for most ATV applications.
- Central piece of the Versa Rack drop-in system
- Fits 2” receiver
- Threaded wobble stop bolt
- Two versions: UTV (Long - 21") and ATV (Short - 15")
SNOWMOBILE
The Versa Snowmobile Plate is the central part of the Versa Rack system. It allows connection to other VersaRack products such as the Versa Auger Carrrier, Bucket Carrier or the Versa Crate Carrier. Made of 11ga and 12ga steel for strength.
Compatibility:
Polaris: Models 2011 and newer with "T-Slot" tunnel
Arctic Cat: Models 2013 and newer
Yamaha: Models 2013 and newer
Ski-Doo: Models compatible with the Ski-Doo Linq system
Older Brands/Models may or may not be compatible.
Disclaimer:
Do NOT exceed manufacturer tunnel load rating.
Always check before drilling to avoid damaging cooling system.
Remove extension tube when not using accessories
